CANITRON ICR  $55.00

INTENTRONIC Color Energy Harmonizing Device

Like a map dowser, you use intersecting straight lines to locate the center of a disharmony in a picture representing a dog’s body. Once you locate the disharmony, you determine its level, or magnitude. Then you determine the appropriate color energy influence to restore the harmony. Finally, you “send” the energy for the appropriate time.

DIRECTIONS FOR USE:

1) Obtain whatever permission you need to go ahead.

2) Turn the HARMONY/TIME dial to “0”. Set the COLOR WHEEL dial to anywhere . Turn SCAN DIAL #2 off the dog drawing.

2) Place a “witness” of the dog to be harmonized on the WITNESS CELL. The witness may be anything intimately associated with the dog, such as a sample of fur, a drop of saliva or blood on a piece of paper, a photograph etc. The dog’s name on a piece of paper is adequate.

3) Intend to find the focus of the disharmony. A disharmony can be any condition that you wish to improve. Slowly turn SCAN DIAL #1 and sweep the a red line across the dog drawing until you get a response* from the SENSOR PLATE. Then sweep SCAN DIAL #2 across the dog’s body drawing until you get a similar response. The two lines cross at the center of the disharmony. Leave the dials set to these positions.

There is another way to use this device if you know the location of a disharmony in the dog’s body. Follow the steps outlined above but instead of scanning the body picture to find the disharmony in step 3, turn the SCAN dials and directly set the lines to cross over the known location of the disharmony.

4) Find the harmony level. Set your intent to determine the level of energy harmony at the intersection of the scan lines. Slowly turn the HARMONY LEVEL dial until you get a response from the DOWSE plate. Record this reference number so you can check the results and progress of the harmonizing treatment.

5) On a small piece of paper, write the a short statement of the results of the harmonizing you desire. Add this paper to the WITNESS CELL. If you are a confident or experienced user you may wish to simply hold the intent in your mind.

6) Now slowly turn the COLOR WHEEL dial until you get a response from the SENSOR PLATE. Leave the pointer set to the corresponding color.

7) Determine how long to send balancing energy. Set your intent to know the time to harmonize the energy disharmony. Slowly turn the HARMONIZE/TIME dial until you get a response from the SENSOR PLATE. This reading represents the time in minutes required to establish an energy balance. Set a timer to this value and when the time runs out, reset the HARMONY/TIME  dial to “0” and remove the items from the WITNESS CELL. Recheck the level of the harmony to see if further balancing in needed.
 

----------------------------------------------------------------------------------------

*Ways to sense the response from the sensor plate: Feel for a “stick” or a change in friction as you lightly rub your fingers over the surface of the SENSOR PLATE as you turn the dials. Or use a pendulum. Or simply place your hand over the SENSOR PLATE and sense a tingle or a change in temperature or pressure.

Click picture to enlarge.

(Big file. May take time)